Phoenix Systems, LLC. is a design-and-build manufacturer of sulfuric acid recovery systems.  We design our equipment recognizing that sulfuric acid recovery is the first stage of process optimization. 

From acid pickling, rinsing, fluxing, and coating, all stages of the process are dependent upon the acid recovery system maintaining excellent quality acid with very low iron entrainment.  Low iron levels in the pickling tanks enhance the tank heating system, speed product throughput and help to minimize product defect.  Low entrained iron in the pickling acid means very little carry-over iron through the rinse, the flux tank, and the kettle. 

Our clients will realize significant savings due to reduced production of dross, ash and skims.

• Our H2™ Conductive Tubing, 2.6 times more conductive than other fluoropolymer tubing, which provides a heat transfer rate similar to steel without the corrosion attack susceptibility.

• Unlike other plastic or metal heat exchangers, our non-stick tubing inhibits the build-up of sludge and foulants that dramatically reduce heat transfer efficiency. Our non-stick tubing also allows for easy crystal and sludge removal with either a steam or hot water rinse.

• Our design prevents crystal bridging and allows for vigorous fluid flow between the tubes. Unlike small diameter tubing, there is no bundling that restricts flow.

• Our heat exchangers are designed to allow for ample spacing between the tubes. For our higher volume plants, we have introduced two new frames with added spacing in length only, or length and width combined.

Heat Exchanger tubing is easy-to-repair and has no weld joints.